The construction requirements for the art-level power coating paint

June 24, 2014-China-For all of these consumers who have high requirement for their ordered powder paint, the high quality artistic powder coating manufacturer could totally meet with their need. This kind of fine powder coating paint has the advantages of beautiful appearance, high three-dimensional sense, good decorative effect and other characteristics. However, there are many strictly requirements for the g process of this painting products. Today, the technician from famous China powder paint supplier CHINA POWDER COATING will introduce with each clients these strictly requirements.

The input pressure for powder dusting should not be too large and the generally level could be controlled within 0.5 to 1.5kg/cm2 as well. Too much air pressure will easily cause into poor pattern and some unclearly points. In addition to the controlling for the air pressure, the voltage for the electrostatic should not be too high which could be generally controlled at about 60 to 70Kv. If the voltage is too high, these attached powders on the surface of the working object will occur the rebound phenomenon.

Secondly, each operator needs to pay more attention to the thickness of the coating powder in the spraying process. Generally speaking, the thickness of the coating surface should be ensured at generally between 70 to 100¦Ìm. This thickness level could be help to form the clear small pattern and larger pattern (www.chinapowdercoating.com). However, the pattern will not be formed if the sprayed film is not obvious and it will also have pitting defects exposed at the end.

The curing for the sprayed surface must be baked at a predetermined temperature and time. If the temperature is too low and the curing time is too short, it will cause into failure forming for pattern while the not completely cured will also greatly reduce the mechanical properties. In addition, due to the special nature of the production process of art-type pattern powder paint, the spraying for the recycled powder will change the pattern surface so it is generally recommended that the recycling art powder could not be used again.

By the viewing from above information, people could find that there are many more stringent requirements for the construction for the spraying of the electrostatic powder coating but it could be believed that as long as people control the coating process factors above the final better effect will be easily got.

If people want to get more information about the power paint, please visit website of famous China power paint manufacturer CHINA POWDER COATING.

About CHINA POWDER COATING

We are the China professional Powder Coating Colors powder manufacturer. As a professional powder coating manufacturer in China, we offer effective powder coating solutions for a wide range of applications, including automotive, appliance, architecture and general industry market. With our dedicated team, we can help you to improve productivity and reduce overall costs. Our products range from general type epoxy powder coating, polyester powder coating and hybrid powder coating to functional powder coatings.

Contact:
CHINA POWDER COATING
Website:http://www.chinapowdercoating.com/

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s